The mower drive belt is a key piece of your mower that allows it to function the way it was designed to., in this article, we are going to take you through the entire process of replacing your mower drive belt along with giving you a few tips on how to ensure the IIIMP MOTO POWER drive belt on lawn mower goes as easy as possible.
Before you begin to replace your mower drive belt: Always turn off your mower and remove the spark plug wire so there’s zero chance the engine will kick over and start during the process.
Find the deck on your mower and take it out by unscrewing the bolts keeping it secured on.
After taking off the deck, find the old belt and carefully remove it by pulling the tension pulley.
Notice how the old drive belt is routed prior to removal as this will allow you to install the new drive belt in the same fashion.
Re-install the new drive belt in reverse order, ensuring that the drive belt is routed correctly.
After the new drive belt has been installed, attach the mower's deck again and make sure the bolts are tightened firmly.
Last but not least, reattach the spark plug wire and test that the mower is functioning correctly for the drive belt.
You are noticing odd sounds and vibrations when you are running your mower.
Your mower blades are not turning properly or are unbalanced.
The grass is being mowed unevenly, or uneven patches are being missed.
Mower will not go forward or backward as it should.
Please refer to the manual provided by the manufacturer for more instructions.
Remember to use an appropriate scale and kind of IIIMP MOTO POWER lawn mower drive belt replacement for your mower.
Insure the drive belt is routed properly prior to mounting the mower deck.
Check the drive belt often and keep it in good condition.
If you're not confident about changing the drive belt yourself, get an expert to help you.
Take a measurement of the length and the width of your old belt to check that you are purchasing the correct sized belt.
Find a replacement drive belt with high-quality materials for durability and service life.
Consult the manufacturer for the approved replacement drive belts.
Just buy an extra drive belt and have on reserve for emergency.
Look for the best fit of replacement drive belts before purchasing for your mower.
Don't jam the drive belt into place or you may damage the mower.
Do not overtighten the tension pulley or the drive belt will wear out soon.
Ensure all nuts and bolts are securely fastened before operating the mower.
Do not operate with a damaged or worn drive belt, doing so can create more problems with your machine.
Don't rush, and go through the procedures one by one to avoid any failures on the drive belt Replacement.
Hopefully, this article has shown you how to do that relatively simple replacement task – a good preventative maintenance trick. With the instructions and tips here, replacing your mower drive belt is a quick and painless process. Make sure that you keep safety on top lists at always and if you are in any doubt at all, consult the manuals or hire a professional maintenance service. With the proper equipment and understanding, you can ensure that you’ll be able to use your IIIMP MOTO POWER mower deck belt replacement for years.
Moto Power supplies premium rubber belts including Classica V-Belt, Cogged V-Belts, Poly Ribbed V-Belt, Timing Belts and more.
No. 588, Tiantong (S) Rd, Yinzhou, Ningbo, Zhejiang, China
Copyright © Ningbo HZ International Trade Co., Ltd. All Rights Reserved - Privacy Policy - Blog
EN
